When I first installed this mic everyone in my area asked what I did to make my rig sound so clean and loud at the same time. The mic I replaced was a Silver Eagle d104. If I ever have a need for another base mic this will be my choice to purchase even though I have a perfect d104 collecting dust. JCD-201M - Preliminary test. 575 and Turner +3 was double the audio than what the 201M was doing. The mic was only tested on SSB. Good in manual mode when.

Product Description JCD 201M Base Station Microphone • Selectable for 2 sets of transceivers at once by slide switch. High Sensitivity Electret Condenser Microphone Element equipped. • High Quality Compressor Amplifier ( High - Low selectable ) built-in. It sends out constant and optimum level without distortion regardless of audio input level. • Equipped with FM(AM)/SSB Audio Quality Selector Switch for optimum operation. The Electret Condenser Microphone ensures clearer voice quality in FM(AM) position and better voice quality on SSB.

• Non-Modulation Prevention Circuit built-in. After continuous transmitting for a few minutes, the alarm circuit will be activated with alarm sound for 30 seconds. Then, the condition returns to receiving mode automatically. • Battery-Check Circuit built-in. Turn the power switch on ( by selecting 'FM' or 'SSB' position ), and the level meter indicates the battery condition with power voltage for a few seconds.] Amplification: • High - 45dB • Low - 35dB • Manual Dual Microphone Connectors Output: • Output A 8 Pin Standard Microphone Plug • Output B 8 Pin Standard Microphone Plug Front panel switch controlled.

Meter - Dual Display • VU (Volume Unit) • Battery Indicator • 1-1/2' H x 2' W Buttons: • Output Select ~ [Out A] [Out B] [Out-Off] • Compression Level ~ [High] [Low] [Manual] • Manual Compression Control Knob [Minimum] ~ [Maximum] • Mode ~ [SSB] [FM] [Battery-Check] • Channel Control Switch ~ [Up] [Down] • Key Controls ~ [PTT] [Lock] Output Voltage: • Amplification - 0.3mv (Lapse) • Variable Amplification: 0-70mv(Lapse) Output Resistance: 500 W ~ 100k W Batteries Required: 3 ~ AAA Optional interface cables and foot switch available.

• 126 Answers SOURCE: This procedure is not as simple as just cutting a wire. Guru raghavendra vaibhava serial songs mp3. Note that you can possibly mess your radio up if any maintenace is not done properly. I do suggest taking your radio to a proffesional to have the talkback removed, but, if you really want to do it yourself, go to ghe following link and basically reverse what has been done. This is the service bulletin for the addition of talkback to the Cobra 150GTL DX and the Cobra 200GTL DX.

As long as the talkback was added correctly, this can be put back origional. If this does or does not help, please reply on here or email me at.

I look forward to hearing from you. Dean Rollin CBs Mt. Vernon, TX Posted on Feb 14, 2008. Sipovka kostyanka karolek.