The Vintage Conn 8D. Back in the Elkhart era Conn made a brass version of the 8D that was marketed as the 28D which had a smaller throated bell [UPDATE: See the first comment for more]. Today the approximate equivalent of that horn in their line is the 9DY.

As far as playing is concerned,Abilene instruments may play well and some are in use by professionals. However, their resale value is much less than the Elkhart instruments, for reasons explained below. Conn moved to Abilene for the advantage of using local labor who were willing to work for less than the experienced workers in Elkhart.

However, the workmanship (assembly, soldering, finishing, and machining) is considered to be of inferior quality in comparison with the Elkhart instruments since the Abilene workers were largely inexperienced and unskilled. Most importantly, when Conn moved to Abilene, they discontinued the process of tapering the rotors and cylinders of their rotary valves in order to save time and lower costs in the manufacturing process. If the instrument is marked C.G. USA with no reference to Elkhart Indiana, then it is an Abilene horn. For your information: C.G. Conn moved its production of professional line low brasses to Abilene in August of 1972, (Not 1967 as some incorrect serial number lists indicate.) Erik Siverson Charles Turner, 0:00 น. On Wed, 9 Dec 1998 01:44:37 -0500, Tjenchew Lee wrote: >I've often heard that Conn 8D horns made between 1967 and 1974 (i.e.

Abilene >Horns) are inferior to the regular 8D's. In what ways are they inferior and >how would they compare with other horns? I have never played one.

Some things I've heard said about them are that the quality of their assembly was variable, and that the valve rotors are not tapered. Apparently non tapered rotors, when they wear after some years, are more expensive to repair than tapered rotors. However, I believe David Jolly plays a Texas 8D; he is a great player so presumably his Texas 8D is a good one. A Texas 8D could be a good buy if one shops carefully. I think that 1967 date is too early for Texas.

My 'L' series was built in Elkhart in 1968. I think the 'M' serial numbers (1970) were the last of this series, so maybe the Texas move occurred for the 1971 models. Highly compressed pc games 7 mb.

Tholian, 0:00 น. I have been playing on an Abilene Conn for almost twenty years (bought it new in 1978). I've stuck with it all this time for several reasons, ranging from not being able to afford anything else in my poverty-stricken student days, to just being a stubborn cuss, to actually liking the thing. Siverson is absolutely correct, though, about the resale value. I will never be able to get out of this horn what I put into it. Eventually, I became very unsatisfied with the performance of the valves and had Lawson replate AND taper the rotors, after which there were no further problems.

But it was extremely expensive. I also began to feel limited by poor intonation and a somewhat erratic scale, and a McCracken leadpipe improved these things a great deal. In recent years, I have been plagued by broken braces, and in one case, the 'water' slide (upper l.h. As you are looking at the front of the horn) fell apart in my hands and had to be rebuilt.